This video shows you how to change the oil and oil filter in your 2009 Hyundai Santa Fe. When you change your own oil, you know that you are putting quality oil in your Santa Fe and that the filter is being changed too. Most importantly, you get a chance to look around under your Santa Fe for potential trouble spots. This video shows you the location of your oil drain plug, oil filter, oil fill cap and dipstick in addition to the steps needed to change the oil and filter in your Santa Fe. For most Hyundais, you can wrap an old belt around the oil filter and unscrew it by hand. If you can't do this, see our page to find a Hyundai Santa Fe oil filter wrench. If your Santa Fe is too low to the ground to access your drain plug and oil filter, be sure to use jack stands and safe jacking procedures before getting under your Santa Fe.
Most Hyundais have the oil type printed on the oil cap - it will likely be 5W-20, 5W-30, 5W-40, 10W-30 or 10W-40. If it isn't printed on the oil cap, check your owners manual for the exact type before adding new oil. We recommend wearing safety glasses whenever you are working under your Santa Fe. You never know what could be dripping down from the engine, battery acid, engine coolant, brake fluid, etc. All of these fluids are extremely harmful to your eyes and skin so it is important to protect yourself.
We carry a full inventory of genuine Hyundai Santa Fe Oil Filter, especially designed to maximize factory-level performance. You can limit the results to the actual Oil Filter that fits your vehicle.